APEX 2000 Series Wet Metal

APEX 2000 Series Wet Metal

Description

Deburring, Grinding, Edge Radiusing

The 2000-Series of machines are built with heavier production requirements in mind. They are designed to run multiple shifts per day and handle such applications as deburring, slag grinding, calibrating/dimensioning, edge radiusing, paint/surface preparation, finishing/polishing or a combination of these applications. This series of machine can be built in both top and bottom configurations.

MACHINE FEATURES

  • Machines built in widths from 19″ to 52″ and multiple head frames
  • Dual infeed and outfeed pinch rolls to ensure parts feed through machine properly
  • One- to four-head configurations with drum, brush and disc heads or combination drum/brush/disc heads
  • Spray headers on both sides of sanding area to keep parts cool and belts clean during operation
  • Individual cam adjustment down to .001″ per head for accurate finishing
  • Paper media filtration system with automatic paper advance for ease of operation
  • Air-loaded cylinder for automated belt tensioning
  • Automatic abrasive belt tracking to ensure proper belt alignment during operation.

MACHINE SPECIFICATIONS

Belt Width
19″ to 52″
 
Motor Size
7.5 HP to 50 HP
 
Number of Heads
1 to 4
 
Types of Heads Available
Drum, Scotch-Brite, Brush and Disc
 
Drum Size
100 mm to 280 mm
 
Machine Configuration
Top-Only, Bottom-Only, or Top/Bottom Combination
 
Feed Motor
1 HP to 3 HP

 


Share this product

Authorized APEX Retailer

2snsbrandsslider 05About APEX MACHINE GROUP

High quality, abrasive sanding machines and supplies for processing a variety of metal, wood, plastic and composite material.

Metal Solutions: Deburring, Grinding, Edge Rounding, and Polishing

Our metal working machines are designed for a variety of applications, including removing burr or slag, precision grinding, oxide removal, rounding edges and polishing metal products.

Apex machines can support up to four working heads in order to achieve optimal results. With a combination of abrasive belts, oscillating discs, and rotating brushes, it is possible to grind, remove burr or slag, round edges and/or polish your product in a single pass.

Whether you are processing stainless steel, mild steel, aluminum, copper, brass, titanium, or other ferrous or non-ferrous material, we have a machine to meet your needs.