APEX 1000 Series Wet Metal

APEX 1000 Series Wet Metal

Description

Deburring, dross removal, calibrating/dimensioning, edge radiusing or finishing

The 1000-series of machines are built in a heavy duty construction with a smaller footprint designed to accommodate the small to medium shop with various applications such as deburring, dross removal, calibrating/dimensioning, edge radiusing or finishing. This series of machine can be built in one to three heads and also in either top and bottom configurations.

MACHINE FEATURES

  • Dual infeed and outfeed pinch rolls to ensure parts feed through machine properly
  • Single, double or triple head configurations with drum, brush or discs heads or a combination drum/brush/or disc heads
  • Spray headers on both sides of sanding area to keep parts cool and belts clean during operation
  • Individual adjustment down to .001″ per head for accurate finishing
  • Paper media filtration system with automatic media advance
  • Air-loaded cylinder for automated belt tensioning
  • Automatic abrasive belt tracking to ensure proper belt alignment during operation

MACHINE SPECIFICATIONS

Belt Width
13″ to 43″
 
Motor Size
5 HP to 30 HP
 
Number of Heads
1 to 4
 
Types of Heads Available
Drum, Scotch-Brite, Brush and Disc
 
Drum Size
120 mm to 280 mm
 
Machine Configuration
Top-Only, Bottom-Only, or Top/Bottom Configuration
 
Feed Motor
1 HP to 3 HP


Share this product

Authorized APEX Retailer

2snsbrandsslider 05About APEX MACHINE GROUP

High quality, abrasive sanding machines and supplies for processing a variety of metal, wood, plastic and composite material.

Metal Solutions: Deburring, Grinding, Edge Rounding, and Polishing

Our metal working machines are designed for a variety of applications, including removing burr or slag, precision grinding, oxide removal, rounding edges and polishing metal products.

Apex machines can support up to four working heads in order to achieve optimal results. With a combination of abrasive belts, oscillating discs, and rotating brushes, it is possible to grind, remove burr or slag, round edges and/or polish your product in a single pass.

Whether you are processing stainless steel, mild steel, aluminum, copper, brass, titanium, or other ferrous or non-ferrous material, we have a machine to meet your needs.